HanSong
- Since our establishment in 1999, we have been working hard to become the best
in the world under our motto of “Passion” and “Vision.” As a result of our efforts to
replace imported end mill products with domestic products, we believed that
we contributed to the reduction in the market share of imported tools,
more than 50% at the beginning of establishment, to less than 20% in recent times.
Also, we have exported to about 60 countries around the world through increased
brand recognition by our continuous technology development and participations in overseas exhibitions. - We think that this was possible because of the hard work of our many customers as well as
executives and employees of our affiliates who have supported us with continuous trust
in technology development and quality improvement. We promise to not be satisfied with
the present and will always do our best for customer-oriented quality management and
customer satisfaction. - We will always be awake and have strength even though we may be small, and we will be
a company where all members have a sense of ownership. We hope for your continued
interest and support so that we can always think and explore with customers and become
“Hansong” that grows and develops together with customers anytime anywhere.
6-12 working days
12mm l30 L100 D12 square type long endmill up to 55HRC - HSMNT - 4HLE-120-300-CA0
Article number: 4HLE-120-300-CA0
39.52 € + VAT
(50.19 €)
6-12 working days
12mm l30 L80 D12 square type 4 flutes vunequal flute and helix steel and inox endmill - Hansong - 4SUE-120-300-C80
Article number: 4SUE-120-300-C80
35.34 € + VAT
(44.88 €)
6-12 working days
12mm l30 L80 D12 square type endmill up to 55HRC - HSMNT - 2HPE-120-300-C80
Article number: 2HPE-120-300-C80
28.14 € + VAT
(35.74 €)
6-12 working days
12mm l30 L80 D12 square type endmill up to 55HRC - HSMNT - 4HHE-120-300-C80
Article number: 4HHE-120-300-C80
32.91 € + VAT
(41.79 €)
6-12 working days
12mm l30 L80 D12 square type endmill up to 55HRC - HSMNT - 4HPE-120-300-C80
Article number: 4HPE-120-300-C80
30.99 € + VAT
(39.36 €)
6-12 working days
12mm l30 L80 D12 square type endmill up to 55HRC - HSMNT - 6HPE-120-300-C80
Article number: 6HPE-120-300-C80
40.04 € + VAT
(50.85 €)
6-12 working days
12mm l30 L80 D12 square type grounded shank endmill up to 55HRC - HSMNT - 2HRE-120-300-C80
Article number: 2HRE-120-300-C80
34.99 € + VAT
(44.44 €)
6-12 working days
12mm l30 L80 D12 square type grounded shank endmill up to 55HRC - HSMNT - 4HRE-120-300-C80
Article number: 4HRE-120-300-C80
38.53 € + VAT
(48.94 €)
6-12 working days
12mm l30 L80 square type 4 flutes endmill up to 65HRC - HSMNT - 4RPE-120-300-C80
Article number: 4RPE-120-300-C80
34.09 € + VAT
(43.29 €)
6-12 working days
12mm l30 L80 square type grounded shank endmill up to 65HRC - HSMNT - 4RRE-120-300-C80
Article number: 4RRE-120-300-C80
42.38 € + VAT
(53.83 €)
6-12 working days
12mm l30,0 L80 ball type endmill up to 65HRC - HSMNT - 2RRB-120-300-C80
Article number: 2RRB-120-300-C80
39.06 € + VAT
(49.61 €)
6-12 working days
12mm l32 L80 D12 square type 3 flutes aluminium endmill - Hansong - 3ALE-120-320-C80
Article number: 3ALE-120-320-C80
31.51 € + VAT
(40.01 €)
6-12 working days
12mm l33 L80 D12 square type 2 flutes aluminium endmill - Hansong - 2ALE-120-330-C80
Article number: 2ALE-120-330-C80
28.67 € + VAT
(36.41 €)
6-12 working days
12mm l35 L100 D12 square type long endmill up to 55HRC - HSMNT - 2HLE-120-350-CA0
Article number: 2HLE-120-350-CA0
47.93 € + VAT
(60.88 €)
6-12 working days
12mm l35 L100 D12 square type long endmill up to 55HRC - HSMNT - 4HLE-120-350-CA0
Article number: 4HLE-120-350-CA0
41.09 € + VAT
(52.18 €)
6-12 working days
12mm l35 L80 D12 ball type grounded shank endmill up to 55HRC - HSMNT - 2HRB-120-300-C80
Article number: 2HRB-120-300-C80
35.52 € + VAT
(45.11 €)
6-12 working days
12mm l36 L90 D12 square type 1 flute aluminium endmill - Hansong - 1ALE-120-360-C90
Article number: 1ALE-120-360-C90
39.69 € + VAT
(50.41 €)
6-12 working days
12mm l40 L100 D12 square type 3 flutes aluminium endmill - Hansong - 3ALE-120-400-CA0
Article number: 3ALE-120-400-CA0
36.21 € + VAT
(45.99 €)
6-12 working days
12mm l40 L100 D12 square type long endmill up to 55HRC - HSMNT - 2HLE-120-400-CA0
Article number: 2HLE-120-400-CA0
40.62 € + VAT
(51.59 €)
6-12 working days
12mm l40 L100 D12 square type long endmill up to 55HRC - HSMNT - 4HLE-120-400-CA0
Article number: 4HLE-120-400-CA0
42.65 € + VAT
(54.17 €)
6-12 working days
12mm l40 L100 square type 4 flutes endmill up to 65HRC - HSMNT - 4RLE-120-400-CA0
Article number: 4RLE-120-400-CA0
46.92 € + VAT
(59.58 €)
6-12 working days
12mm l40 L110 D12 ball type grounded shank endmill up to 55HRC - HSMNT - 2HRB-120-400-CB0
Article number: 2HRB-120-400-CB0
44.92 € + VAT
(57.04 €)
6-12 working days
12mm l40 L110 D12 square type grounded shank endmill up to 55HRC - HSMNT - 2HRE-120-400-CB0
Article number: 2HRE-120-400-CB0
40.33 € + VAT
(51.22 €)
6-12 working days
12mm l40 L110 D12 square type grounded shank endmill up to 55HRC - HSMNT - 4HRE-120-400-CB0
Article number: 4HRE-120-400-CB0
45.38 € + VAT
(57.64 €)
6-12 working days
12mm l40 L110 square type grounded shank endmill up to 65HRC - HSMNT - 4RRE-120-400-CB0
Article number: 4RRE-120-400-CB0
49.92 € + VAT
(63.39 €)
6-12 working days
12mm l40 L150 D12 square type long endmill up to 55HRC - HSMNT - 4HLE-120-400-CF0
Article number: 4HLE-120-400-CF0
51.18 € + VAT
(65.00 €)
6-12 working days
12mm l40 L90 D12 square type 4 flutes vunequal flute and helix steel and inox endmill - Hansong - 4SUE-120-400-C90
Article number: 4SUE-120-400-C90
36.74 € + VAT
(46.65 €)
6-12 working days
12mm l40,0 L110 ball type endmill up to 65HRC - HSMNT - 2RRB-120-400-CB0
Article number: 2RRB-120-400-CB0
39.06 € + VAT
(49.61 €)
