HanSong
- Since our establishment in 1999, we have been working hard to become the best
in the world under our motto of “Passion” and “Vision.” As a result of our efforts to
replace imported end mill products with domestic products, we believed that
we contributed to the reduction in the market share of imported tools,
more than 50% at the beginning of establishment, to less than 20% in recent times.
Also, we have exported to about 60 countries around the world through increased
brand recognition by our continuous technology development and participations in overseas exhibitions. - We think that this was possible because of the hard work of our many customers as well as
executives and employees of our affiliates who have supported us with continuous trust
in technology development and quality improvement. We promise to not be satisfied with
the present and will always do our best for customer-oriented quality management and
customer satisfaction. - We will always be awake and have strength even though we may be small, and we will be
a company where all members have a sense of ownership. We hope for your continued
interest and support so that we can always think and explore with customers and become
“Hansong” that grows and develops together with customers anytime anywhere.
6-12 working days
10mm l25 L70 D10 ball type grounded shank endmill up to 55HRC - HSMNT - 2HRB-100-250-A70
Article number: 2HRB-100-250-A70
27.22 € + VAT
(34.57 €)
6-12 working days
10mm l25 L70 D10 square type endmill up to 55HRC - HSMNT - 2HPE-100-250-A70
Article number: 2HPE-100-250-A70
23.45 € + VAT
(29.78 €)
1 pcs in stock
10mm l25 L70 D10 square type endmill up to 55HRC - HSMNT - 4HHE-100-250-A70
Article number: 4HHE-100-250-A70
27.39 € + VAT
(34.78 €)
6-12 working days
10mm l25 L70 D10 square type endmill up to 55HRC - HSMNT - 4HPE-100-250-A70
Article number: 4HPE-100-250-A70
26.63 € + VAT
(33.82 €)
6-12 working days
10mm l25 L70 D10 square type endmill up to 55HRC - HSMNT - 6HPE-100-250-A70
Article number: 6HPE-100-250-A70
31.91 € + VAT
(40.53 €)
6-12 working days
10mm l25 L70 D10 square type grounded shank endmill up to 55HRC - HSMNT - 2HRE-100-250-A70
Article number: 2HRE-100-250-A70
30.29 € + VAT
(38.47 €)
6-12 working days
10mm l25 L70 D10 square type grounded shank endmill up to 55HRC - HSMNT - 4HRE-100-250-A70
Article number: 4HRE-100-250-A70
33.42 € + VAT
(42.45 €)
6-12 working days
10mm l25 L70 square type 4 flutes endmill up to 65HRC - HSMNT - 4RPE-100-250-A70
Article number: 4RPE-100-250-A70
29.30 € + VAT
(37.21 €)
6-12 working days
10mm l25 L70 square type grounded shank endmill up to 65HRC - HSMNT - 4RRE-100-250-A70
Article number: 4RRE-100-250-A70
36.77 € + VAT
(46.70 €)
6-12 working days
10mm l25 L75 D10 square type 4 flutes vunequal flute and helix steel and inox endmill - Hansong - 4SUE-100-250-A75
Article number: 4SUE-100-250-A75
27.57 € + VAT
(35.01 €)
6-12 working days
10mm l25 L75 D10 square type endmill up to 55HRC - HSMNT - 4HHE-100-250-A75
Article number: 4HHE-100-250-A75
28.61 € + VAT
(36.33 €)
6-12 working days
10mm l25 L75 D10 square type endmill up to 55HRC - HSMNT - 4HPE-100-250-A75
Article number: 4HPE-100-250-A75
28.03 € + VAT
(35.60 €)
6-12 working days
10mm l25,0 L70 ball type endmill up to 65HRC - HSMNT - 2RRB-100-250-A70
Article number: 2RRB-100-250-A70
29.94 € + VAT
(38.02 €)
6-12 working days
10mm l26 L75 D10 square type 1 flute aluminium endmill - Hansong - 1ALE-100-260-A75
Article number: 1ALE-100-260-A75
25.07 € + VAT
(31.84 €)
6-12 working days
10mm l27 L75 D10 square type 3 flutes aluminium endmill - Hansong - 3ALE-100-270-A75
Article number: 3ALE-100-270-A75
23.56 € + VAT
(29.93 €)
6-12 working days
10mm l28 L75 D10 square type 2 flutes aluminium endmill - Hansong - 2ALE-100-280-A75
Article number: 2ALE-100-280-A75
21.41 € + VAT
(27.19 €)
6-12 working days
10mm l30 L80 D10 square type long endmill up to 55HRC - HSMNT - 2HLE-100-300-A80
Article number: 2HLE-100-300-A80
29.30 € + VAT
(37.22 €)
6-12 working days
10mm l30 L80 D10 square type long endmill up to 55HRC - HSMNT - 4HLE-100-300-A80
Article number: 4HLE-100-300-A80
30.87 € + VAT
(39.21 €)
6-12 working days
10mm l32 L80 D10 square type 1 flute aluminium endmill - Hansong - 1ALE-100-320-A80
Article number: 1ALE-100-320-A80
30.18 € + VAT
(38.32 €)
6-12 working days
10mm l32 L90 D10 square type 3 flutes aluminium endmill - Hansong - 3ALE-100-320-A90
Article number: 3ALE-100-320-A90
27.04 € + VAT
(34.34 €)
6-12 working days
10mm l35 L100 D10 ball type grounded shank endmill up to 55HRC - HSMNT - 2HRB-100-350-AA0
Article number: 2HRB-100-350-AA0
37.08 € + VAT
(47.10 €)
6-12 working days
10mm l35 L100 D10 square type grounded shank endmill up to 55HRC - HSMNT - 2HRE-100-350-AA0
Article number: 2HRE-100-350-AA0
33.54 € + VAT
(42.60 €)
6-12 working days
10mm l35 L100 D10 square type grounded shank endmill up to 55HRC - HSMNT - 4HRE-100-350-AA0
Article number: 4HRE-100-350-AA0
39.00 € + VAT
(49.53 €)
6-12 working days
10mm l35 L100 D10 square type long endmill up to 55HRC - HSMNT - 2HLE-100-350-AA0
Article number: 2HLE-100-350-AA0
30.35 € + VAT
(38.55 €)
6-12 working days
10mm l35 L100 D10 square type long endmill up to 55HRC - HSMNT - 4HLE-100-350-AA0
Article number: 4HLE-100-350-AA0
37.43 € + VAT
(47.54 €)
6-12 working days
10mm l35 L100 square type 4 flutes endmill up to 65HRC - HSMNT - 4RLE-100-350-AA0
Article number: 4RLE-100-350-AA0
41.17 € + VAT
(52.29 €)
6-12 working days
10mm l35 L150 D10 square type long endmill up to 55HRC - HSMNT - 4HLE-100-350-AF0
Article number: 4HLE-100-350-AF0
50.08 € + VAT
(63.60 €)
6-12 working days
10mm l35 L85 D10 square type 4 flutes vunequal flute and helix steel and inox endmill - Hansong - 4SUE-100-350-A85
Article number: 4SUE-100-350-A85
28.67 € + VAT
(36.41 €)
