HanSong
- Since our establishment in 1999, we have been working hard to become the best
in the world under our motto of “Passion” and “Vision.” As a result of our efforts to
replace imported end mill products with domestic products, we believed that
we contributed to the reduction in the market share of imported tools,
more than 50% at the beginning of establishment, to less than 20% in recent times.
Also, we have exported to about 60 countries around the world through increased
brand recognition by our continuous technology development and participations in overseas exhibitions. - We think that this was possible because of the hard work of our many customers as well as
executives and employees of our affiliates who have supported us with continuous trust
in technology development and quality improvement. We promise to not be satisfied with
the present and will always do our best for customer-oriented quality management and
customer satisfaction. - We will always be awake and have strength even though we may be small, and we will be
a company where all members have a sense of ownership. We hope for your continued
interest and support so that we can always think and explore with customers and become
“Hansong” that grows and develops together with customers anytime anywhere.
6-12 working days
8mm l20 L65 D8 square type endmill up to 55HRC - HSMNT - 6HPE-080-200-865
Article number: 6HPE-080-200-865
24.55 € + VAT
(31.18 €)
6-12 working days
8mm l20 L65 D8 square type grounded shank endmill up to 55HRC - HSMNT - 4HRE-080-200-865
Article number: 4HRE-080-200-865
22.45 € + VAT
(28.52 €)
6-12 working days
8mm l20 L65 square type 4 flutes endmill up to 65HRC - HSMNT - 4RPE-080-200-865
Article number: 4RPE-080-200-865
21.51 € + VAT
(27.32 €)
6-12 working days
8mm l20 L65 square type grounded shank endmill up to 65HRC - HSMNT - 4RRE-080-200-865
Article number: 4RRE-080-200-865
24.71 € + VAT
(31.38 €)
6-12 working days
8mm l20 L70 D8 square type 4 flutes vunequal flute and helix steel and inox endmill - Hansong - 4SUE-080-200-870
Article number: 4SUE-080-200-870
20.95 € + VAT
(26.60 €)
6-12 working days
8mm l20 L75 D8 square type endmill up to 55HRC - HSMNT - 4HHE-080-200-875
Article number: 4HHE-080-200-875
24.37 € + VAT
(30.95 €)
6-12 working days
8mm l20 L75 D8 square type endmill up to 55HRC - HSMNT - 4HPE-080-200-875
Article number: 4HPE-080-200-875
21.30 € + VAT
(27.05 €)
6-12 working days
8mm l20 L75 square type 4 flutes endmill up to 65HRC - HSMNT - 4RPE-080-200-875
Article number: 4RPE-080-200-875
23.43 € + VAT
(29.75 €)
6-12 working days
8mm l20,0 L60 ball type endmill up to 65HRC - HSMNT - 2RRB-080-200-860
Article number: 2RRB-080-200-860
22.86 € + VAT
(29.03 €)
6-12 working days
8mm l21 L70 D8 square type 1 flute aluminium endmill - Hansong - 1ALE-080-210-870
Article number: 1ALE-080-210-870
20.37 € + VAT
(25.87 €)
6-12 working days
8mm l22 L70 D8 square type 3 flutes aluminium endmill - Hansong - 3ALE-080-220-870
Article number: 3ALE-080-220-870
16.94 € + VAT
(21.52 €)
6-12 working days
8mm l23 L70 D8 square type 2 flutes aluminium endmill - Hansong - 2ALE-080-230-870
Article number: 2ALE-080-230-870
15.44 € + VAT
(19.60 €)
6-12 working days
8mm l25 L100 D8 square type long endmill up to 55HRC - HSMNT - 2HLE-080-250-8A0
Article number: 2HLE-080-250-8A0
26.87 € + VAT
(34.12 €)
6-12 working days
8mm l25 L100 D8 square type long endmill up to 55HRC - HSMNT - 4HLE-080-250-8A0
Article number: 4HLE-080-250-8A0
28.73 € + VAT
(36.48 €)
6-12 working days
8mm l25 L75 D8 square type long endmill up to 55HRC - HSMNT - 2HLE-080-250-875
Article number: 2HLE-080-250-875
20.25 € + VAT
(25.72 €)
6-12 working days
8mm l25 L75 D8 square type long endmill up to 55HRC - HSMNT - 4HLE-080-250-875
Article number: 4HLE-080-250-875
22.63 € + VAT
(28.74 €)
6-12 working days
8mm l25 L80 D8 square type 4 flutes vunequal flute and helix steel and inox endmill - Hansong - 4SUE-080-250-870
Article number: 4SUE-080-250-870
20.95 € + VAT
(26.60 €)
6-12 working days
8mm l26 L75 D8 square type 1 flute aluminium endmill - Hansong - 1ALE-080-260-875
Article number: 1ALE-080-260-875
23.39 € + VAT
(29.70 €)
6-12 working days
8mm l28 L80 D8 square type 3 flutes aluminium endmill - Hansong - 3ALE-080-280-880
Article number: 3ALE-080-280-880
18.63 € + VAT
(23.66 €)
6-12 working days
8mm l30 L100 D8 square type long endmill up to 55HRC - HSMNT - 4HLE-080-300-8A0
Article number: 4HLE-080-300-8A0
25.59 € + VAT
(32.50 €)
6-12 working days
8mm l30 L100 square type 4 flutes endmill up to 65HRC - HSMNT - 4RLE-080-300-8A0
Article number: 4RLE-080-300-8A0
28.15 € + VAT
(35.75 €)
6-12 working days
8mm l30 L150 D8 square type long endmill up to 55HRC - HSMNT - 4HLE-080-300-8F0
Article number: 4HLE-080-300-8F0
32.15 € + VAT
(40.83 €)
6-12 working days
8mm l30 L80 D8 ball type grounded shank endmill up to 55HRC - HSMNT - 2HRB-080-300-880
Article number: 2HRB-080-300-880
28.14 € + VAT
(35.74 €)
6-12 working days
8mm l30 L80 D8 square type 3 flutes aluminium endmill - Hansong - 3ALE-080-300-880
Article number: 3ALE-080-300-880
19.15 € + VAT
(24.32 €)
5 db in stock
8mm l30 L80 D8 square type 4 flutes vunequal flute and helix steel and inox endmill - Hansong - 4SUE-080-300-880
Article number: 4SUE-080-300-880
21.82 € + VAT
(27.71 €)
6-12 working days
8mm l30 L80 D8 square type grounded shank endmill up to 55HRC - HSMNT - 2HRE-080-300-880
Article number: 2HRE-080-300-880
22.98 € + VAT
(29.18 €)
6-12 working days
8mm l30 L80 D8 square type grounded shank endmill up to 55HRC - HSMNT - 4HRE-080-300-880
Article number: 4HRE-080-300-880
26.17 € + VAT
(33.24 €)
6-12 working days
8mm l30 L80 D8 square type long endmill up to 55HRC - HSMNT - 2HLE-080-300-880
Article number: 2HLE-080-300-880
22.51 € + VAT
(28.59 €)
